地址查询：杭州市丰台
电活：67506536
座机：60260516
电话：13911696698
油箱：13911696698@163.com
QQ:139696698
额定负载相电压0.6/1kV聚氯乙烯绝缘电力电缆
PVC insulated power cables with rated voltages 0.6/1kV
🦩本类产品适宜于配电设备网、工农业提升装置等域，应用在固定好敷建到互动50Hz、额定功率电压值0.6/1kV的供用电输配电设备的线路上，其主要系统是气力输送机能量。本类设备为一般说来因素下选用的类设备，恶化的情况用一下特定因素的时候，如架空线路、水中、船用、海里、核电站站等。
安全性能好聚氯丁二烯隔热低压电缆采中用具安全性能好规范的场所。
💮耐火聚氯乙稀绝缘带电览支持于下水道通道铁道、下水道通道家具卖场、中大型买东西中心点、顶层建筑工程等等口稠密、空气流通受到限制的场景。
This product is applicable to being fixedly laid on the transmission and distribution line of alternative current rating 50Hz and rated voltage up to 0.6/1.0Kv with the use for power transmission, which is applied to the range of distribution network, industrial equipments, etc.This product is the nomal used cable, not suitable for some special places, such asunderwater, ship, nuclear station, etc.𒁃本好产品缆线除都有可靠性的机电稳定性外，还都有强些的以避免化学物质灼伤性，抗腐蚀、碱和有机会强酸强碱，缆线没受敷设起伏的受限制，可在任何人起伏因此垂线的施工地点敷设。
The product has good performance on electrical characteristic, chemical resistance, such as acid resistance, alkali resistance and organic solvent resistance. The product can be laid on any head drop condition even vertically in any place, that is to say, the cable can be laid without limit on head drop.⛄GB/T 12706.1-2002 稳定电压降1 kV(Um=1.2 kV)到35 kV(Um=40.5 kV)挤包绝缘带电力能源缆线及扫描件
第1部位：额定功率线电压 1kV(Um=1.2 kV)和3 kV(Um=3.6 kV)高压电缆
🌌Power cables with extruded insulation and their for rated voltages from 1kV(Um=1.2kV) up to 35kV(Um=40.5kV) Part 1:Cables for rated voltages of 1kV(Um=1.2kV) and 3 kV（Um=3.6 kV）
💦IEC 60502-1:1997 固定电阻1 kV(Um=1.2 kV)到30 kV(Um=36 kV)挤包绝缘性魅力线缆及辅助件
第2环节：载荷系数电流 1 kV(Um=1.2kV)和3 kV(Um=3.6kV)电揽
💜Power cables with extruded insulation and their for rated voltages from 1kV(Um=1.2kV) up to 35kV(Um=40.5kV) Part 1:Cables for rated voltages of 1kV(Um=1.2kV) and 3 kV（Um=3.6 kV）
Q/12BJ4973-2002 额定功率电流电压0.6/1kV 五芯塑胶绝缘带魅力缆线
Q/12BJ4973-2002 Five cores extruded plastic insulated power cables with rated voltages 0.6/1kVGB/T 3956-1997 电力电缆的导体
♍GB/T 3956-1997 Conductor of Cables
GB/T19666-2005 爱游戏彩票 耐火电源线线缆通则
GB/T 19666-2005 General Rules of flame-retarding and fireproof cables1、 功率电阻Rated Voltage
缆线特殊电压电流U0/U(Um)为：0.6/1(1.2)kV
Rated Voltage of cable U0/U(Um)：0.6/1(1.2)kV
中仅：Notes：
U0：电揽结构设计用的导体对地或塑料禁掉中的功率工频相电压；
Rated A.C. Voltage between conductor and ground/metal screen;U：缆线结构设计用的导体间的额定值工频的电压；
Rated A.C. Voltage between conductorsUm：的设备可拥有的“至高体系交流电压“的最多值。
The maximum system voltage which the equipments can be beared๊数据线的稳定交流电压应适用于数据线坐落平台的电脑运行能力。想要有助于确定数据线，将平台分布为下列关于三大类：
The rated voltage of cable shall be applicable to system operation condition where the cable lain in. According to cable selecting, the system will be described as 3 types as follow:——A类：同一个相导体与地或接地保护导体遇到时，能在1min内与程序防护隔离。
😼System category A —When any phase of cable conductor is contacting with earth conductor, the cable will be isolated with the system.
✤——B类：可在二相接地线告警时作短时间启动，但其中的情况下不得突破8h，一年的接地系统故障总不断事件不应多于125h。
System category B ─The system is allowed to run for 8 hours, when the single-phase earth fault is existing. And the total earth-fault time of 1 year won't be above 125 hours.
——C类：例如不包括A类和B类的装置。
♋System category C ─They are including all systems besides A and B.
🍷注：在软件模式等电位连接出现问题的无法会自动的关闭时，出现问题的过后加在电缆线电线绝缘电阻参过高的电磁场标准，会在有一定的程度上节约电缆线电线生存期。如软件模式期望值会时常地进行在持续的等电位连接出现问题的的状态下，该软件模式应划为C类。
When the system earth fault can't be removed automatically, the life of cable will be shortened in some degree because of the over-high electric stess beared by cable insulation.
在四项软件系统的电线电缆，U0的高性价比值见表1。
The recommended figure of U0 𒅌see the table 1, which are suitalbe for the three systems.
表1 额定负载输出功率U0推荐英文值
Table1 The recommended figure of U0
体统最多电压值Um/kV The maximum system voltageUm/kV | 额定值电压降/kV Rated Voltage/ kV | |
A类、B类 System categories A and B | C类 Systems categories C | |
| 1.2 | 0.6 | 1.2 |
2、 导体额定的操作温
The rated temperature of conductor线缆导体的较高稳定事情的温度为70℃。
ꦺThe maximum assigned temperature of the cable conductor is 70℃。
断路时（最久不间断期限不超越5s）低压电缆导体的极高温不低于160℃。
𝄹During having a short circuit, lasting less than 5 seconds, the maximum temperature of the cable conductor shall not be above 160℃.
3、 敷设环镜室内温度
Ambient temperature for laying电线电缆敷设时的生态温度表应不不少于0℃，不能需要及时暖机。
𒆙The ambient temperature for laying shall be above 0℃, if not the cable need be preheated.
4、 装有可以弯曲的转弯半径
The bend radius装设时电线电缆最少内弯圆的直径见表2。
The minimun bend radius of the cable see the table 2表2 拖链电缆安装使用时最大曲折圆的半径
Table2 The minimun bend radius of the cable建设项目 Item | 单芯高压电缆 Single -core | 三芯电揽 Three -core | ||
无铠装 Unarmored | 有铠装 Armored | 无铠装 Unarmored | 有铠装 Armored | |
𓆉安装使用时的线缆较大弯度回转半径 Minimun bend radius of the cable in course of installation | 20D | 15D | 15D | 12D |
邻近接盒和终下数据线的很小弯曲变形回转半径 The minimun bend radius of the cable close to the junction box and terminal | 15D | 12D | 12D | 10D |
ꦺ注：D为拖链电缆外径（mm）。Note:D is outer diameter of the cable | ||||
5、 敷设具体方法
电线都没有敷设高差控制。
There is no limit of head drop during the cable laying.电揽能够敷加设室内装修、舍外、氧气采和泥土中，能够位置有淹水。
The cable may be laid in indoor, outdoor, air and soil. The cable may be immersed in water locally.ꦏ通信低压线缆敷设手段可以是桥隧、管路、通信低压线缆管、电线桥架、配管，铠装通信低压线缆支持直埋地下层，钢线铠装通信低压线缆支持向下敷设。
The cable may be laid in tunnel, pipe, trench, conduit and on cable bridge. The amoured cable can be laid undergroud, and the wire- amoured cable can be laid vertically.单芯线缆不不得敷设置在永磁铁金属质管路。
The single core cable mustn't be laid in the magnetic metal pipes.电线电缆敷设环境应用好的热量散发环境。
The enviroment of cable laying shall be in good heat dissipation condition.6、 电线高压电缆敷设时导体比较大合法的迁重力和电线高压电缆比较大合法的侧心理压力
The maxium allowed haul-off force and lateral pressure of cable🍃导体最大化限制牵引机力计算工艺工艺：he calculating method of the maxium allowed haul-off force
——铜导体：F=70×S（N/mm2）。
——铝导体：F=40×S（N/mm2）。
侧阻力算起形式：P=F÷R（N/m），最主要能够侧水压不大于3000N/m。
S－导体横截面，mm2；conductor section
P－侧负荷，N/m；lateral pressure
R－数据线弯折变形圆的直径，m；Bend radius
7、 缆线车辆和收存符合要求
The requirements on transportation and storage:电线电缆盘不不可以平放。
The cable reels shall not be delivered and stored in flat state车辆运输中禁止从高空坠落扔下去配有数据线的数据线盘，禁止机器板材损害数据线。
It is strictly forbidden to push the cable reel from the high level in order to prevent the cable from damages高压线缆线一旦可以逐段食用，高压线缆线逐段后有必要用防水涂料封帽将高压线缆线头密封隔绝，处理泡水。
If the cable should be used sectionally, the head of the cable must be sealed in order to prevent water intake.1、型号Code
导体代码Conductor code
🧸铜导体（省略）Copper conductor ( omitted )………………………………………………………………T
🎃铝导体aluminium conductor…………………………………………………………………………………L
绝缘层命名规则Insulation code
😼聚氯乙稀绝缘层 cross-linking polyethylene(XLPE) insulated……………………………………………V
护线套型号1）Sheath code
☂聚氯氯乙烯保护套 polyvinyl chloride and sheath………………………………………………………………V
♋聚乙稀绝缘护套 polyethylene sheath……………………………………………………………………………Y
铠装简称Amour code
♊双尼龙带铠装steel tape armoured ……………………………………………………………………………2
꧅细弹簧钢丝铠装thin steel-wire armoured ……………………………………………………………………3
ඣ粗槽钢丝铠装thick steel-wire armoured ……………………………………………………………………4
双非磁块金属材质带2）𒅌铠装 Double non-magnetic metal tape amoured………………………………………6
非磁体金屬丝3）🌞铠装Non-magnetic metal-wire amoured……………………………………………………7
外绝缘护套代码Outer sheath code
💜聚氯丁二烯外护线套 polyvinyl chloride outer sheath …………………………………………………………2
♚聚丁二烯外绝缘护套 polyethylene outer sheath …………………………………………………………………3
编编码Series code
阻燃性系列的fire-safe series
ꦛ安全性能好A类flame-retardant class A …………………………………………………………………………ZA
🧔阻燃材料B类flame-retardant class B …………………………………………………………………………ZB
🤪隔热、阻燃C类flame-retardant class C …………………………………………………………………………ZC
🥀抗静电D类flame-retardant class D …………………………………………………………………………ZD
耐火系fire-safe series
🔴耐燃A类耐火flame-retardant class A fire-safe…………………………………………………………ZAN
🥀耐油B类耐火flame-retardant class B fire-safe…………………………………………………………ZBN
ღ耐油C类耐火flame-retardant class C fire-safe…………………………………………………………ZCN
爱游戏彩票 阻燃D类耐火flame-retardant class D fire-safe…………………………………………………………ZDN
注：Note
1） 包含挤包的内衬层和要进行隔离套等。
ℱ Including the extruding inner covering and separating tape.
2） 非磁铁金属原料带其中包括不锈钢管带、铝带等，若购货时未署名，用到那些原料由制造技术方决定。
🐷 Non-magnetic metal tapes are including stainless steel tape, aluminium tape, etc. The materials will determined by the manufacturer, if the buyer not mentioned.
3） 非带磁合金资料丝涉及到不锈钢圆管板、金属丝、铝丝等，若购货时未标出，通过那种资料由制作方确实。
🎉 Non-magnetic metal wires are including stainless steel tape, aluminium tape, etc. The materials will determined by the manufacturer, if the buyer not mentioned.
2、物料标识办法Expressed method of product
🍸新产品用技术参数（技术参数含有数码8型号的电缆电线外护层，数码8前的ps文字型号透露内保护套）、金桥铜业跨接线的受力积大小（额定值电流值、芯数、标称受力）和基准号透露。
The product is described as type (figure code of cable outer sheath, the word code in front of the figure means inner sheath), specification(rated voltage, cores numbers, sectioal area ) and standards code.3、车辆类型主成The consistant of specifications
的产品参数的组建和排列成先后顺序以下：
The consistant of specification, as follow:①正规电线技术参数形成
 |
②爱游戏彩票 阻燃耐火线缆规格组成部分
注：电能数据线款型组成的中绝缘性大部分成为国产简称。
🅰Note：The insulation in the cable specifications are the series code.
4、成品标识手段 Expressed method of product
例子：铝芯聚氯丁二烯接地带钢铠装聚氯丁二烯保护套输配电电缆电线，固定线电压0.6/1kV，3+2芯，标称受力150mm2，透露为：
VLV22-0.6/1 3*150+2*70 GB/T 12706.1-2002 Q/12BJ4973-2002Example: Aluniminum conductor PVC insulated, steel tape armoured and PVC sheathed power cables, rated Voltages 0.6/1kV, 3+2 cores, Nominal cross area 150mm2, see the following:
VLV22-0.6/1 3*150+2*70 GB/T 12706.1-2002 Q/12BJ4973-2002举例：铜芯聚氯乙稀绝缘层带钢铠装聚氯乙稀保护套电力工程电线，额定值端电压为0.6/1 kV ，2芯，标称载面185mm2， 显示为：
VV22-0.6/1 2*185 GB/T12706.1-2002Example: Copper conductor PVC insulated, steel tape armoured and PVC sheathed power cables, rated Voltages 0.6/1kV, 2 cores, Nominal cross area 185mm2, see the following:
VV22-0.6/1 2*185 GB/T12706.1-2002铜芯聚氯氯丁二烯耐压（聚氯氯丁二烯内护线套）尼龙带铠装聚氯氯丁二烯护线套爱游戏彩票 阻燃C类输配电电缆线，稳定电流0.6/1kV，3芯，标称断面150mm2，说为：
ZC-VV22-0.6/1 3*150 GB/T19666-2005/GB/T12706.1-2002Example: Copper conductor PVC insulated, steel tape armoured and PVC sheathed flame-retardant class C power cables, rated Voltages 0.6/1kV, 3croes, Nominal cross area 150mm2, see the following:
ZC-VV22-0.6/1 3*150 GB/T19666-2005/GB/T12706.1-2002铜芯聚氯乙烯绝缘（聚氯乙烯内护套）钢带铠装聚氯乙烯护套耐火电力电缆，额定电压0.6/1kV，3+2芯，标称断面150mm2，带表为：
NHVV22-0.6/1 3*95+2*50 GB/T19666-2005/ Q/12BJ4973-2002Example: Copper conductor PVCinsulated, steel tape armoured and PVC sheathed flame-retardant class C fire-safe power cables, rated Voltages 0.6/1kV, 3+2cores, Nominal cross area 150mm2, see the following:
NHVV22-0.6/1 3*95+2*50 GB/T19666-2005/ Q/12BJ4973-20021、类产品款型Type of product
软件惯用技术参数见表3。
For the common product types , please see the table 3表3 食品款式
Table 3 Type of product规格 Type | 产 品 名 称 Name of product | 用于位置及氛围 Applicability and urroundings | |
铜 芯 Copper core | 铝 芯 Aluminium core | ||
| VV | VLV | 聚氯氯氯乙烯绝缘电阻聚氯氯氯乙烯护线套电力网数据线 PVC insulated PVC sheath power cable | 屋内、隧道施工及线缆沟等公共场所，不可能所能承受机戒惯性力。单芯线缆不能够敷开在剩磁地埋管中。 🧸For laying indoors 、 intunnel or cable trench,unable to bear external mechan-icalforces.Single-core cable in magnetic duct is not permissible |
| VY | VLY | 聚氯氯氯乙烯绝缘层pvc绝缘护套电力公司电揽 PVC insulated PE sheath power cable | |
| VV22 | VLV22 | 聚氯氯氯乙烯耐压双链条铠装聚氯氯氯乙烯绝缘护套用电电缆电线 💜PVC insulated steel tape armoured PVC sheath power cable | 🧜屋内、地下隧道、电览沟内，或埋地敷设等，能承载必定机诫外部力量，但未能承载大的拉力。 For laying indoors 、 in tunnel, cable trench, or direct in ground,able to bear external mechanicalforces, but unable to bear large pulling force 。 |
| VV23 | VLV23 | 聚氯氯丁二烯隔绝双钢表带铠装聚丁二烯护线套电业缆线 🌼PVC insulated steel tape armoured PE sheath power cable | |
| VV32 | VLV32 | 热塑聚氯乙稀绝缘带细弹簧钢丝铠装聚氯氯乙稀护线套电能电缆电线 🌱PVC insulated thin steel-wire armoured PVC sheath power cable | ꦉ内、隧道施工、电缆线沟、竖井或埋地敷设等，能背负厂家重力和需的拉力。 For laying indoors 、 in tunnel, cable french, well or direct in ground,able to bear external mechanical forces, and certain force 。 |
| VV33 | VLV32 | 聚氯乙稀接地细螺纹钢丝铠装聚乙稀保护套用电高压电力电缆 𒁏PVC insulated thin steel-wire armoured PEsheath power cable | |
| VV42 | VLV42 | 聚氯乙稀耐压粗不锈钢钢丝铠装聚氯乙稀保护套电量的使用拖链电缆 🐟PVC insulated thin steel –wire armoured PVC sheath power cables | |
| VV43 | VLV43 | 聚氯氯乙稀耐压粗铁丝铠装聚乙稀护线套电力工程电览 ♔PVC insulated thin steel –wire armoured PE sheath power cables | |
2、产品设备的规格 Specification of product
產品额定的电流值、导体标称断面和芯数见表4。
For product rated voltage, conductor sectiona and the numbers of cores, please see the table 4.表4 產品尺寸规格
Table 4 Specification of prouduct型 号 Type | 芯数 Number of cores | 标称横截面 Nominal cross area(㎜2) | |
| VV,VY-VV22,VV23 | -VLV,VLYVLV22,VLV23 | 1 | 1.5-3002.5-30010-300 |
| VV,VY-VV22 VV23 | -VLV,VLYVLV22 VLV23 | 2 | 1.5-1852.5-1854-185 |
| VV,VY-VV22 VV23VV32 VV33VV42 VV43 | VLV,VLY-VLV22 VLV23VLV32 VLV33VLV42 VLV43 | 3 | 1.5-3002.5-3004.0-30016-30016-300 |
| VV,VYVV22 VV23 | VLV,VLYVLV22 VLV23 | 4 | 4-1854-185 |
| VV,VYVV22 VV23 | VLV,VLYVLV22 VLV23 | 3+1 | 4-1854-185 |
| VV,VYVV22 VV23 | VLV,VLYVLV22 VLV23 | 3+2、4+1 | 10-30010-300 |
ཧ综上所述一切的技术参数尺寸和护肤品尺寸中，耐燃高压电缆技术参数尺寸前加ZRA、ZRB、ZRC、ZRD，耐火电揽电揽机型前加NH,无卤低烟耐油电力电线电力电线具体型号前加WDZC。
1、导体 Conductor
꧃导体应以合乎GB/3956 的首个种或第2种裸降温铜导体或镶金属层降温铜导体，或这四种其一的裸铝导体或铝合金型材属导体；一些第5种裸铜导体或电镀属层固溶处理铜导体。
The conductor shall meet the first one of the requirement of GB/3956 or the second one of that, that is bare anneal copper conductor, or bare aluminium conductor or aluminium alloy, or the fifth one of that, that is bare copper conductor or metal coated anneal copper conductor.2、耐火层fire resistant layer
☂ 耐火通信电缆导离体两层绕包耐火黑云母带，黑云母带绕包必须要不平、融洽，不能够有折皱、漏包等的缺陷。
The cables are to overlap and wrap two layers of mica tape outside the cable conductor so as to form the fire resistant layer.3、隔绝Insulation
绝缘层带应严密挤包在导体上，且应极易剥落而不磨损绝缘层带体、导体或电镀件。
The insulation layer shall be extruded on the conductor, and it shall be easy to be stripped without damages on insulation, conductor and coating layer.4、分隔套（有铠装拖链电缆）Inner sheath（Armoured cables）
选择聚氯氯乙烯（PVC）或聚乙稀（PE）挤包在缆芯上。
The separated sheath is the extruding PVC or PE on the cable cores.5、铠装 Armoured
🥃多芯电线适用热镀带钢或热镀不锈钢钢丝，用在联席会电路的单芯电线适用非磁块重轻金属带或重轻金属丝（见第九条）。
塑料带用两层摩擦绕包，塑料丝用很多根同德同心绞合。
The amour of the multiple cable shall be zinc-plated steel tape or wire, but the amour of the single cable uesed in AC circuit shall be non-magnetic metal-tape or metal-wire. The tappering mode of metal tape should adopt double layer open tappering, and the mode of metal wire shall mutiple concentric stranding.ﷺ注：大批量观点声明书，按照两种特定结构类型特征铠装（如加铁丝的隔磁结构类型特征）的单芯拖链线缆用到聊天二次回路时均突然出现拖链线缆产生热量导至载总流量大有增涨的现像，之所以不选择按照。
Note: A large number of facts show that the single cable with the special structure amour in the AC circuit exists the heating phenomenon, thus causing the reduction of current capacity. The manufacturer don't suggest to adopt this kind cable.
6、外护线套Outer sheath
用ST2型聚氯氯乙烯保护套料或ST7型聚氯乙烯（PE）绝缘性护套料挤包在铠装、绝缘性或缆芯上。
The materials of outer sheath are extruding ST2 PVCor ST7 PE on amour, insulation or cable cores.
7、原材料数据线的标制Cable marks
🌺的成品电缆电线的外绝缘护套外壁上有厂名、尺寸、电机额定功率额定功率、芯数、标称断面和米数的持续标志的意思。
The outer sheath of the cable shall have the following information printed at regular intervals throughtout the length of the cable: Manufacturer's Name, Type of cable, Rated Voltage, the numbers of cores, Sectional Area and Meters Number of Continuous Marks.8、 产品的结构的表示图Pictures of products structure
